Max/Min Therma Hygrometer Termikplus-E

Termikplus-E – Temperature and Humidity Meter with Replaceable Sensor

MANUFACTURER: TERMOPRODUKT

Suitable for laboratories, warehouses, cold storage, vaccine transportation, and refrigerators.

Calibration Certificate for Data Logger Termikplus-E

Features:

• Temperature measurement range: -30°C to 70°C
• Relative humidity measurement range: 0 to 100% RH
• Resolution: 0.1
• Displays maximum and minimum recorded temperature and humidity
• Low battery indicator
• Backlight
• Replaceable sensor
• Power supply: built-in rechargeable battery

Accessories:

- Calibration Certificate available for purchase (issued by our laboratory or an accredited PCA-certified lab)

- Wall mounts (screw-on with lock or magnetic)

Sensor:

The Termikplus-E uses a replaceable SHT1 sensor.

The external sensor responds quickly to changes in humidity and is protected by a filter that shields it from dust and other contaminants. This ensures higher resistance to dirt. If the readings become inaccurate, the sensor should be replaced. Thanks to the built-in connector, replacement is quick and easy.

To ensure accurate measurements and prolong sensor lifespan, follow these guidelines:

• The device can measure humidity up to 100% RH, but avoid condensation.
• The sensor should not come into direct contact with water.
• Avoid exposure to aerosols, solvent vapors, strong acids, and bases.
• The sensor should operate in an environment free from high concentrations of volatile organic compounds (VOCs) and airborne dust.

Contaminants can negatively impact measurement accuracy, so it's crucial to maintain a clean environment, free from aggressive chemicals and airborne particles.

The built-in rechargeable battery provides approximately 10 months of continuous operation on a full charge. Charging is done via the built-in charging port.